Pumps

Compact, Extremely Quiet, Pump. 1 HP, 3 Phase, 0.75kW, 2 Poles, Stainless Steel Construction, 80 l/m Max Flow. 1" Inlet x Outlet, Liquid temperature range of -10˚F to 105˚F. 100 PSI, 230/400 V, 50 Hz. High performance motor with class F Insulation and IP X4 Protection. Suitable for use with clean water applications. Do not use for aggressive chemical applications. Not for use in an outdoor environment. Power cable not included.

Kit, Rails,1-3/8″, 47, 66 Series, Large

O-ring for CAT Pump 310, 530, 550, 560. Nitrile (Buna-N)

O-ring for CAT Pumps 3535, 3520. Valve Seat

Pumptec Pump, 114T SPRAY BASIC, NYLON BODY, VITON, M70, 120V, 1.5 AMPS

Brass Spacer for AR Pumps. 7.05 mm

Valve Spring Retainer for CAT 3 Frame Piston Pump. Models 31,34, 35, 310, 310B, 310S, 340, 350, 350B, 350S, 5CP212-214-215, 530.

TripleX Plunger AR Pump, 1450 RPM's, 5.55 GPM's max, 5100 PSI max, 18mm Bore Diameter, 21mm Stroke, 32 oz. oil capacity, 1/2" F Inlet x 3/8" F Outlet, 140°F max temp.

Oil 2.5 gal CAT Crankcase

Valve Kit for 5DX, 6DX, 66DX Pumps. Note: 2 kits are required to service entire pump.

Seal Kit for 6DX, 66DX Pumps

KIT, Piston Rod Oil Seal for TX1315 Pump

Seal Case Manifold O-Rings for CAT Pump

CAT 5 CP Plunger Pump, Industrial triplex design. 4.5 GPM, 3500 PSI, 1645RPM's.
Max Temp: 160º F. (2) Inlet Ports: 1/2" NPTF, (2) Outlet Ports: 3/8" NPTF.
Shaft Diameter: 20 mm. Stainless steel valves, seats and springs.

COUPLER For GP Pump, 1-1/8 X 24MM

FLANGE For 47 & 48 Series GP Pumps

Flange for HTX Emperor Series Pump.

General Pump Unloader; 10 GPM; 5075 PSI