Swivel Adapter Steel 3/8" M x 1/4" F
SNon-Working Swivel / Male Pipe Swivel Adapter 3/8" MNPT x 1/4" FNPT. PSI 2250 Max. 3/4-14 Thread.Steel Male Pipe Swivel Adapter 3/8"M X 1/4"F 140464
Swivel Adapter Steel 3/8" M x 1/4" F
Nozzle 4010 White 1/4" MPT Vee Jet
Spraying Systems 4010 White 1/4" MPT. Kynar Vee Jet Nozzle.
Nozzle 4010 White 1/4" MPT Vee Jet
Injector Rocket Single Barb 3/8" .051 Tan
Low Flow Rocket Injector. Single barb 3/8" MNPT, Tan, 316 Stainless Steel Body, 35 PSI Outlet Pressure, .85 GPM.
Injector Rocket Single Barb 3/8" .051 Tan
Injector Rocket Single Barb 3/8" .55 Yellow
Single Barb Rocket Injector 3/8" MNPT Yellow .055 GPM
Injector Rocket Single Barb 3/8" .55 Yellow
Relay 240V HydroTek SPDT
Miniature Relay, 240VAC, SPDT, w/top mounting bracket. 10A contacts.
Relay 240V HydroTek SPDT
Time Delay Relay, AC/DC 1 AMP
Time Delay for HydroTek Pressure Washers. 1Amp, 265VAC/120VDC max input.
Time Delay Relay, AC/DC 1 AMP
Bushing 5/8" Water Tank Hydrotek
HydroTek Water Tank Bushing 5/8"
Bushing 5/8" Water Tank Hydrotek
Rupture Disk 6500# @ 250 PSI
Rupture Disk 6500# @ 250 PSI. Use with adapter D4086.
Rupture Disk 6500# @ 250 PSI
Hose End Reusable 3/8" Swivel
Reusable straight 2-piece swivel fitting, 3/8" OD Swivel x 3/8" NPT. Zinc Steel. For use with single wire braid hose.
Hose End Reusable 3/8" Swivel
Hose End Reusable 3/8" Rigid
Reusable Rigid 2-piece straight fitting, 3/8" Tube OD x 3/8" NPT. Zinc Steel. For use with single wire braid hose.
Hose End Reusable 3/8" Rigid
Nozzle MEG 15050 1/8"
MEG Nozzle 15050 1/8", Stainless Steel.
Nozzle MEG 15050 1/8"
Wash & Wax 55 Gallon Drum
Wash & Wax high foaming car wash detergent. Non-caustic, designed for hand washing. Leaves a polymer coating on the vehicle surface.
Wash & Wax 55 Gallon Drum
Wash & Wax 5 Gallon
Wash & Wax high foaming car wash detergent. Non-caustic, designed for hand washing. Leaves a polymer coating on the vehicle surface.
Wash & Wax 5 Gallon
HydroTek HD30003E2G Hot Water Pressure Washer
HydroTek HD Series Hot Water Pressure Washer with heavy duty stainless steel frame, coil protection, handles and panels. Belt Driven. 3000 PSI @ 3.2 GPM, 6.5 HP Engine, 230V, Single Phase, 27 Amps. Belt driven General Pump pump, 4 Gallon float tank, 4 pneumatic wheels. Control panel with lighted rocker switches, adjustable thermostat and soap control. 50' hose (3000 PSI), Insulated Gun & 36" wand, Insulated coil, 8 Gallon Fuel Tank. Inlet soap injection combines with chemical metering valve and float tank to inject soap at full pressure. 35' cord with Ground Fault Circuit Interrupter. Coil with Lifetime warranty against leaks in coil pipe for the life of the machine. Optional Hose Reel available.
HydroTek HD30003E2G Hot Water Pressure Washer
Union 1" Sch 80 PVC Socket Ends
1" Schedule 80 PVC Union. EPDM O-ring, Socket connections, 235 PSI maximum internal pressure @ 73°F.
Union 1" Sch 80 PVC Socket Ends
Hose Reel Manual Rewind Wall Mount
Manual Hose Reel with e-coated frame. Holds 1/4" (150'), 3/8"(100') or 1/2" (70') hose. Direct crank rewind permanently attached with adjustable cam-lock-brake. Exterior mounting holes. 90° swivel joint. Standard inlet 1/2" FNPT. Standard outlet 3/8" FNPT (1/2" available upon request). 3000 PSI, 20° F to 400° F max. Field installable pin lock. 8" Drum.
Hose Reel Manual Rewind Wall Mount
Proportioner Assy for 427P-21 & 437P-21
DEMA Proportioner Assembly 36.21 for 427 & 437 Assemblies.
Proportioner Assy for 427P-21 & 437P-21
Lance, Coated 1/2" MPT 72"
Hydro Excavation Coated Stainless Steel 72" Lance. 1/2" MPT Inlet & Outlet, 8700 PSI, 300°F max temperature. Spark resistant coating. High abrasion resistance, hardness and impact strength. Resistance to chemical exposure and mechanical stresses, oil, fuels, salts and thinned acids.
Lance, Coated 1/2" MPT 72"
Swivel Adapter Steel 3/8" M x 1/4" FSNon-Working Swivel / Male Pipe Swivel Adapter 3/8" MNPT x 1/4" FNPT. PSI 2250 Max. 3/4-14 Thread.Steel Male Pipe Swivel Adapter 3/8"M X 1/4"F 140464 Swivel Adapter Steel 3/8" M x 1/4" F
Product successfully added to your
shopping cart
|
Nozzle 4010 White 1/4" MPT Vee JetSpraying Systems 4010 White 1/4" MPT. Kynar Vee Jet Nozzle. Nozzle 4010 White 1/4" MPT Vee Jet
Product successfully added to your
shopping cart
|
Injector Rocket Single Barb 3/8" .051 TanLow Flow Rocket Injector. Single barb 3/8" MNPT, Tan, 316 Stainless Steel Body, 35 PSI Outlet Pressure, .85 GPM. Injector Rocket Single Barb 3/8" .051 Tan
Product successfully added to your
shopping cart
|
Injector Rocket Single Barb 3/8" .55 YellowSingle Barb Rocket Injector 3/8" MNPT Yellow .055 GPM Injector Rocket Single Barb 3/8" .55 Yellow
Product successfully added to your
shopping cart
|
Relay 240V HydroTek SPDTMiniature Relay, 240VAC, SPDT, w/top mounting bracket. 10A contacts. Relay 240V HydroTek SPDT
Product successfully added to your
shopping cart
|
Time Delay Relay, AC/DC 1 AMPTime Delay for HydroTek Pressure Washers. 1Amp, 265VAC/120VDC max input. Time Delay Relay, AC/DC 1 AMP
Product successfully added to your
shopping cart
|
Bushing 5/8" Water Tank HydrotekHydroTek Water Tank Bushing 5/8" Bushing 5/8" Water Tank Hydrotek
Product successfully added to your
shopping cart
|
Rupture Disk 6500# @ 250 PSIRupture Disk 6500# @ 250 PSI. Use with adapter D4086. Rupture Disk 6500# @ 250 PSI
Product successfully added to your
shopping cart
|
Hose End Reusable 3/8" SwivelReusable straight 2-piece swivel fitting, 3/8" OD Swivel x 3/8" NPT. Zinc Steel. For use with single wire braid hose. Hose End Reusable 3/8" Swivel
Product successfully added to your
shopping cart
|
Hose End Reusable 3/8" RigidReusable Rigid 2-piece straight fitting, 3/8" Tube OD x 3/8" NPT. Zinc Steel. For use with single wire braid hose. Hose End Reusable 3/8" Rigid
Product successfully added to your
shopping cart
|
Nozzle MEG 15050 1/8"MEG Nozzle 15050 1/8", Stainless Steel. Nozzle MEG 15050 1/8"
Product successfully added to your
shopping cart
|
Wash & Wax 55 Gallon DrumWash & Wax high foaming car wash detergent. Non-caustic, designed for hand washing. Leaves a polymer coating on the vehicle surface. Wash & Wax 55 Gallon Drum
Product successfully added to your
shopping cart
|
Wash & Wax 5 GallonWash & Wax high foaming car wash detergent. Non-caustic, designed for hand washing. Leaves a polymer coating on the vehicle surface. Wash & Wax 5 Gallon
Product successfully added to your
shopping cart
|
HydroTek HD30003E2G Hot Water Pressure WasherHydroTek HD Series Hot Water Pressure Washer with heavy duty stainless steel frame, coil protection, handles and panels. Belt Driven. 3000 PSI @ 3.2 GPM, 6.5 HP Engine, 230V, Single Phase, 27 Amps. Belt driven General Pump pump, 4 Gallon float tank, 4 pneumatic wheels. Control panel with lighted rocker switches, adjustable thermostat and soap control. 50' hose (3000 PSI), Insulated Gun & 36" wand, Insulated coil, 8 Gallon Fuel Tank. Inlet soap injection combines with chemical metering valve and float tank to inject soap at full pressure. 35' cord with Ground Fault Circuit Interrupter. Coil with Lifetime warranty against leaks in coil pipe for the life of the machine. Optional Hose Reel available. HydroTek HD30003E2G Hot Water Pressure Washer
Product successfully added to your
shopping cart
|
Union 1" Sch 80 PVC Socket Ends1" Schedule 80 PVC Union. EPDM O-ring, Socket connections, 235 PSI maximum internal pressure @ 73°F. Union 1" Sch 80 PVC Socket Ends
Product successfully added to your
shopping cart
|
Hose Reel Manual Rewind Wall MountManual Hose Reel with e-coated frame. Holds 1/4" (150'), 3/8"(100') or 1/2" (70') hose. Direct crank rewind permanently attached with adjustable cam-lock-brake. Exterior mounting holes. 90° swivel joint. Standard inlet 1/2" FNPT. Standard outlet 3/8" FNPT (1/2" available upon request). 3000 PSI, 20° F to 400° F max. Field installable pin lock. 8" Drum. Hose Reel Manual Rewind Wall Mount
Product successfully added to your
shopping cart
|
Proportioner Assy for 427P-21 & 437P-21DEMA Proportioner Assembly 36.21 for 427 & 437 Assemblies. Proportioner Assy for 427P-21 & 437P-21
Product successfully added to your
shopping cart
|
Lance, Coated 1/2" MPT 72"Hydro Excavation Coated Stainless Steel 72" Lance. 1/2" MPT Inlet & Outlet, 8700 PSI, 300°F max temperature. Spark resistant coating. High abrasion resistance, hardness and impact strength. Resistance to chemical exposure and mechanical stresses, oil, fuels, salts and thinned acids. Lance, Coated 1/2" MPT 72"
Product successfully added to your
shopping cart
|