Conveyors and Automatics
PRE-SOAKS (LIQUID)
Formula 576 "The Finisher"
Premium high alkaline liquid pre-soak created for use with Formula 575 "The Solution" in the two- step low pH/high pH pre-soak system. Synergistically designed for use with Formula 575 to achieve optimum two-step cleaning process. Will not dull or streak vehicle. Biodegradable. Can be applied through high or low pressure pre-soak arches.
Dilutions: 2nd low pressure pre-soak arch at 64:1 to 75:1 Single stage pre-soak at 90:1 to 120:1
Hot Shot Alkaline Pre-Soak Enhancer
Produces exceptional cleaning results when used in conjunction with alkaline based pre-soaks. (Formula 576 "The Finisher")
Enhances cleaning power when you need it. Cost effective and high concentrated. Use in frictionless, hybrid, and conventional car washes.
Dilutions: Pre-soak- 75 to 120 1 and HOT SHOT 120 to 500:1
-Dual-Eductor Hydrominder- start with purple tip for soakand pink for HOT SHOT.
*Warsaw Chemical Titration kit is NECESSARY to insure proper dilutions.
Formula 600 Micro Pak AP
Premium Hyper Concentrated, Liquid PreSoak designed for frictionless and reduced friction cleaning. The Economical, Ecological, Ergonomic Alternative. One kit makes 15 gallons of concentrated pre-soak. Citrus scent. Can be used as two-step, low pH/high pH system or as a single stage pre-soak.
Dilutions: 100 gallons of fresh water to mix while blender running for 5 mins. 90:1 to 120:1
*Warsaw Chemical Tritration kit is recommended to determine strength
Maxi Brite
Will clean and brighten most automobile surfaces when used in conjunction with an alkaline
detergent, this cleaning system will remove magnetic road film without brushing. Works in cold or hot water.
Dilutions: 120:1 water to cleaner
Bond Breaker
Second step cleaning compound for touchless car wash systems. The high use dilution rate affords superior economy to the wash operator. It generates copious amounts of foam when used with compressed air injection at use dilution. Rinses free and spotless in cold or hot water. The cationic polymer chemistry goes to work to break the magnetic bond that holds dirt on the vehicle.
Dilutions: 60:1 water to cleaner
Formula 600 RTU
A premium alkaline pre-soak created for use in the two-step, low pH/high pH pre-soak system.
Refreshing citrus scent. Can also be used as a single stage pre-soak.
Dilutions: Apply in the 2nd low pressure pre-soak arch at 64:1 to 75:1 Apply low pH product in the first low pressure pre-soak arch at 90:1 to 120:1 Single Stage Pre-Soak- low pressure arch at 90:1 to 120:1
*Warsaw Chemical Titration Kit is recommended*
PRE-SOAKS (POWDER)
Formula 508 (Plus) Heavy Duty Presoak Detergent
Premium alkaline high sudsing powder detergent, formulated especially for frictionless and reduced friction washing. Versatility to be used for both In Bay automatics and self service washes. Can be used as both high pressure detergent and low pressure presoak.
Dilutions: 3/4 to 1Ib of detergent to 1 Gallon of water in holding tank. Through proportioner at 17:1 to 23:1
*Final dilution ratio varies depending on application*
Formula 588 (Plus) Heavy Duty Detergent/Presoak Powder.
Non-Phosphate version Use with soft water only. Versatility to be used for both In self service washes. Can be used as both high Pressure detergent and low pressure presoak. Does not contain Phosphates.
Dilutions: 3/4 to 1Ib of detergent to 1 Gallon of water in holding tank. Through proportioner at 17:1 to 23:1
*Final dilution ratio varies depending on application*
*Warsaw Chemical Titration Kit is recommended*